您的位置: 标准下载 » 国内标准 » 行业标准 »

JB/T 9740.3-1999 低速风力机 技术条件

时间:2024-05-21 19:13:08 来源: 标准资料网 作者:标准资料网 阅读:9482
下载地址: 点击此处下载
基本信息
标准名称:低速风力机 技术条件
英文名称:Technical specifications for low speed wind energy conversion system
中标分类: 能源、核技术 >> 能源 >> 风能
ICS分类: 能源和热传导工程 >> 风力发电系统和其
替代情况:NJ 423-1986
发布部门:呼和浩特畜牧机械研究所
发布日期:1999-08-06
实施日期:2000-01-01
首发日期:1900-01-01
作废日期:1900-01-01
归口单位:呼和浩特畜牧机械研究所
出版日期:1900-01-01
页数:5 页
批文号:国机管[1999]421号
适用范围

JB/T 9740.3-1999 本标准是对 NJ 423-86《低速风力机 技术条件》的修订,修订后的技术内容有较大改变。 本标准规定了低速成风力机的技术要求,试验方法,检验规则,标志、包装、运输等要求。 本标准适用于叶尖速度比小于 2 的水平轴风力机。 本标准于 1986 年 7 月 30 日首次发布。

前言

没有内容

目录

没有内容

引用标准

没有内容

所属分类: 能源 核技术 能源 风能 能源和热传导工程 风力发电系统和其
Product Code:SAE J647
Title:Automatic Transmissions - Schematic Diagrams
Issuing Committee:Automatic Transmission Transaxle Committee
Scope:The following schematic diagrams exemplify the SAE recommended method of illustrating automotive transmission arrangements. They were developed to standardize industry practice and facilitate a clear understanding of the functional interrelations of the gearing, clutches, hydrodynamic drive unit, and other transmission components. Two variations of diagrams are used: Transmission in neutral and in gear. For illustrative purposes, some typical transmissions are shown.【英文标准名称】:StandardSpecificationforChromium,Chromium-Nickel,andSiliconAlloySteelBarsandShapesforCorrosionandHeat-ResistingService
【原文标准名称】:和耐热耐蚀设备用铬,铬镍及硅合金钢棒材及型材的标准规范
【标准号】:ASTMA968/A968M-1996(2009)
【标准状态】:现行
【国别】:美国
【发布日期】:1996
【实施或试行日期】:
【发布单位】:美国材料与试验协会(US-ASTM)
【起草单位】:A01.17
【标准类型】:(Specification)
【标准水平】:()
【中文主题词】:
【英文主题词】:Chromiumalloysteel--specifications;Chromium-nickel-alloysteel--specifications;Corrosiveserviceapplications--bars/rods/shapes;Siliconalloysteel;Steelbarsandshapes--specifications
【摘要】:1.1Thisspecificationcovershot-andcold-finishedalloysteelbarshavingachromiumcontentequaltoorlessthan11.0%includingrounds,squares,hexagons,andhot-rolledorextrudedshapesforuseincorrosionandheat-resistingservice.1.2Somesteelscoveredbythisspecification,especiallythehighsilicon-containingsteels,becauseoftheirparticularalloycontentandspecializedproperties,mayrequirespecialcareintheirfabricationandwelding.Specificproceduresareoffundamentalimportance,anditispresupposedthatallparameterswillbeinaccordancewithapprovedtestmethodscapableofproducingthedesiredpropertiesinthefinishedfabrication.1.3ThevaluesstatedineitherSIunitsorinch-poundunitsaretoberegardedseparatelyasstandard.Thevaluesstatedineachsystemmaynotbeexactequivalents;therefore,eachsystemshallbeusedindependentlyoftheother.Combiningvaluesfromthetwosystemsmayresultinnon-conformancewiththestandard.1.4Thisspecificationandtheapplicablematerialspecificationsareexpressedinbothinch-poundandSIunits.However,unlesstheorderspecifiestheapplicablex201C;Mx201D;specificationdesignation(SIunits),thematerialshallbefurnishedininch-poundunits.
【中国标准分类号】:H62
【国际标准分类号】:77_120_01
【页数】:2P.;A4
【正文语种】:英语